Jacuzzi not running, is your Jacuzzi your biggest headache

The problem with today’s Jacuzzis or hot tubs is they are too high tech, your problem with your Jacuzzi may not be the blower, pump(s) heater or even the light, it is probably the control box, which is so high tech that any damage to 1 capacitor, 1 diode, 1 IC chip, your PROM (programmable read only memory) chip which contains the software for your system, and nothing works.

To have a service tech come out and find the problem cost 100s of dollars and most of the time they can’t pinpoint the problem so on top of his/her’s 100s $$$ service call you will probably be told you need an entire new control box which runs $400-$1,200 plus service call and chances are the fix won‘t last and you will be giving away your hot tub before spending another $600-$2,000.

How many times do you get in the tub and control it, usually never its usually before you get in and after you get out and changing the temp while your in it, takes hours to take effect, so adjusting it while you are in it using it does nothing for that hot tubing session.

The answer may be going LOW TECH like the good old days… for about the same price as one professionals service call you can convert your system over. If something doesn’t work you will know what is wrong with the system , the fix is cheap and you can do it yourself, We already have the happiest hot tub owner clients in the quad county area.

Call for more info. 727-557-7761

And we do sell and repair hot tub and Jacuzzi pumps/motors starting at $85, heaters starting at $50, blowers starting at $65, filters starting at $50 and many other parts in used and new

Key words: Jacuzzi, Hot Tub, Jacuzzi heater, Jacuzzi blower, Jacuzzi pump, Jacuzzi motor, Jacuzzi control panel, Jacuzzi repair, Hot Tub heater, Hot Tub blower, Hot Tub pump, Hot Tub motor, Hot Tub control panel, Hot Tub repair